Audio Magic XFCM15B2 Hi-Fi Audio Transformer | bignoisempc.com
Audio magic XFCM15B2 Hi-Fi audio transformer is equipped with dual shields and encased in a FMetal can providing 30 dB of magnetic shielding.
Audio Magic XFCM15B2 Hi-Fi Audio Transformer | CineMag USA
- Fully Assembled & Tested
- Users Guide Included
- Pro Audio Equipment
Available on backorder
Audio Magic XFCM15B2 Hi-Fi Stereo Audio Transformer Pair | CineMag Model
This essential passive audio tool brings color, detail, improved sonic image, spacial separation, harmonics and glue to your audio mix. Low frequency phase shift enhances bass frequencies. These are the same style American manufactured transformers, that were used in Urei / UAD & API equipment, and are responsible for that classic sound. Dubbed the Audio Magic XFCM15B2, our initial testing indicates this piece of gear will add subtle character to your audio recordings and mixes. Sounds are glued together, in an ear pleasing way, as they transition through the magnetic medium.
This stereo American issue high performance audio transformer, is a no compromise, professional audio signal transformer primarily intended for line level input and output applications. This broadcast / pro-audio quality EMI screened audio signal transformer offers low distortion, even at high signal levels. Similar style as used in AP2520 series API equipment. We chose the CineMag CMLI-15/15B for this design because of it’s wide-band frequency performance. It exhibits wide bandwidth, common mode rejection ratio (CMRR), and distortion characteristics from 20Hz to 72kHz. This transformer is equipped with dual shields and encased in a FMetal can providing 30 dB of magnetic shielding.
The 3 position toggle switch allows the selection of transformer shield configurations. “G” terminates the output shield to chassis ground, subtlety damping high frequencies via parasitic capacitance. “L” lifts all shields, passing the natural sound of the transformer. “C” couples the input and the output shield adding a subtle shine to high frequencies via resonance between the shields. Seen here, the 1st pre-production unit delivered subtle warming and gluing of the audio signal. As well as opening up the the sonic image and frequency spectrum. High quality die-cast magnesium enclosure. Large non-slip rubber feet. Quality 1/4″ TRS audio I/O connectors. Each stereo transformer unit is fabricated once the order is placed.
This hardware can be put to work during sampling, recording, mixing and mastering. By using it at all project stages, you can achieve results previously only achieved at large studios. These 10K ohm American made transformers, using Mumetal cores, provide minimum load at low frequencies and allow for transparent low end performance. Internal electrostatic shield for high common mode noise rejection. FMetal and aluminum chassis for electrical shielding. Can be used for for eliminating ground loops with interconnected equipment. This product allows project and home studios to achieve outstanding audio quality, at affordable cost. Hand built and tested in the United States, with quality and passion.
- Stereo I/O: Left & Right Channels
- Fully Balanced: Tip, Ring, Sleeve
- Frequency Response: +/- 0.1 dB 20 Hz to 72 kHz
- Power Level Max: +20 dBu | 0.02 % THD at 20 Hz
- Distortion at 1 kHz, +4 dBu Test Circuit 1 Rs=600 RL=15K | 0.0007%
- Winding Ratio: 1:100
- Production Issue: 2020
- MN: CineMag CMLI-15/15B2
- Core Material: Mumetal
- Impedance: 15KHz
- DC Resistance: Approx 1,940 Ohms
- Signal Generator & Drum Machines Not Included
100% SATISFACTION GUARANTEED | QUALITY PRODUCT FROM BIG NOISE MPC
Weight 1.2 lbs Dimensions 11 × 9 × 6 in